Featured new products.


Carboline Polyclad 975 epoxy coating

Polyclad 975 epoxy pipeline coating from Carboline is made to protect buried steel and ductile iron pipeline exteriors, girth welds or tie-ins. The coating can be applied by spray (plural airless or dual cartridge), while companion product Polyclad 975 H can be hand applied by brush or roller. The coating is compatible with FBE, coal tar, tape systems and cathodic protection. 800/848-4645; www.carboline.com.

 

UltraTech containment berm

The rapid-rise containment berm from UltraTech International features a foam top that raises the outer walls with the level of liquid should there be a spill, but remains flat during normal operation. Made for containment of drums, IBCs, vehicles, frac tanks and other large containers, the berm helps meet U.S. Environmental Protection Agency container storage regulation 40 CFR 264.175 and SPCC requirements. Made of Copolymer 2000, custom sizes are available. 800/764-9563; www.spillcontainment.com.

Related: Product Roundup: Dynamic Dewatering

 

Talbert 50CC/RP hybrid trailer

The 50CC/RP hybrid trailer from Talbert Manufacturing Inc. combines a close-coupled, lowbed design with a roller paver model. The trailer has a 26-foot deck length and space for full construction fleet loads with specially designed slope for transporting rollers and pavers. The design slopes from the bottom up to create a moderate incline over a greater distance, approximately a third of the deck length. Finish height at the front of the main beams is 8 3/4 inches. Other features include bolt-on ramp with 15-degree load angle, 50-ton capacity deck width of 8 feet, 6 inches and 20-inch deck height. 888/489-1731; www.talbertmfg.com.

 

Related: October Product News

Chemineer mud mixer

Mud mixers from Chemineer feature gearboxes designed for agitator service with configurations unique to mud mixing. Proprietary analysis software is available to evaluate process parameters and ensure proper impeller selection for specific drilling mud mixing conditions. 937/454-3200; www.chemineer.com.

 

Gradall highway-speed excavator

The XL 5100 IV highway-speed excavator from Gradall Industries has a six-speed AutoDrive Allison automatic transmission and transfer-case that enables the excavator to travel up to 60 mph. Weighing 57,670 pounds, models are available with either a 6 by 4 or 6 by 6 drivetrain. Powered by a 6-cylinder, Detroit Diesel Mercedes OM926 Tier 4i engine (282 hp at 2,200 rpm), the excavator has a maximum reach of 33 feet, 9 inches at grade, full-tilting boom, maximum dig depth of 24 feet, 5 inches and maximum loading height of 18 feet. The rated bucket force is 24,900 pounds. Attachments include excavating buckets, trenching buckets, ditching buckets, dredging buckets, pavement removal buckets, fixed thumb grapple, Telestick, tree limb shear, boom extensions and grading blade. 330/339-2211; www.gradall.com

Related: Pump Systems Matter and Hydraulic Institute to host final 2012 webinar

 

FCI ST100 air/gas flowmeter

The ST100 Series thermal mass air/gas flowmeter from Fluid Components

International has a remote mount transmitter with optional digital display and can be mounted up to 1,000 feet from the flow sensor using interconnecting cable. The meter is available with 4-20 mA analog, frequency/pulse, alarm relays or digital bus communications. 800/854-1993; www.fluidcomponents.com.

 

ATS Black Pearl viscometer

The Black Pearl rotational viscometer from ATS RheoSystems is capable of both steady shear and yield stress testing in a rugged, compact footprint. Designed for performing both routine rheological tests, such as a single point viscosity check for quality control, to complex rheological evaluation for research and development, the unit includes a Peltier temperature control for all measuring systems, cone and plate, parallel plate and concentric cylinder. 609/298-2522; www.atsrheosystems.com.

 

Moyno Tri-Phase pumping system

The Tri-Phase multi-pumping system from Moyno enables all fluids produced at the well site, including oil, water and gas, to be transported simultaneously through one pipeline to a central processing station. The system’s abrasion resistance also allows for the transfer of sandy fluid. The unit is capable of generating flow rates up to 60,000 bfpd with suction pressures up to 900 psi and discharge pressures up to 1,200 psi. 877/486-6966; www.moyno.com.

 

John Deere K-Series backhoe loader

K-Series backhoe loaders from John Deere are available in eight models (310K EP, 310K, 310SK, 310SK TC, 315SK, 410K, 410K TC, 710K). Two economical tractor loaders (210K EP, 210K) round out the series. Powered by a certified IT4/Stage III B John Deere PowerTech engine, the K-Series features a 5-speed transmission for top road speeds of 25 mph. An AutoShift transmission is available. A single loader level with integrated electrohydraulic auxiliary loader control eliminates the need for a second level when using a multipurpose bucket. 800/503-3373; www.johndeere.com.

 

Atlas Copco Simba oil rigs

The ME7 C, E7 C, E7 C-ITH and W7 C Simba long-pole production drill rigs from Atlas Copco are equipped with an automatic rod handling system (RHS) for self-diagnosis and data logging. The rigs are designed for long-hole drilling up to 168 feet. Besides production holes, the rigs have been used to drill service holes and drainage holes. The ME7 C drills 2- to 3.5-inch parallel holes spaced up to 22.6 feet apart. The E7 C drills 3.5- to 5-inch parallel holes up to 20 feet apart. The E7 C-ITH drills parallel holes in the 3.6- to 7-inch range with 17-foot spacing, and the W7 C drills 3.5- to 6.5-inch parallel holes up to 19.4 feet apart. 800/732-6762; www.atlascopco.us.

 

Roxtec cable, pipe sealing modules

BG (bonding and grounding) rubber sealing modules for cables and pipes from Roxtec feature a center core and removable black and blue layers for adaptability to different sizes of cable and pipes that simplify installation and logistics. Designed to seal large quantities of metal clad or armored cables in minimal space, a single module can seal a cable or pipe of different diameters. The modules, used with a frame and compression unit, provide a seal that protects against water, fire, gas, pressure, sand, pests, dust and dirt, while ensuring a certified bonded or grounded termination. The seals also protect against damage from pullout, blast load, vibrations, noise and electromagnetic interference. 800/520-4769; www.roxtec.com.

 

General Pipe Cleaners Vista inspection system

The Gen-Eye Vista video inspection system from General Pipe Cleaners includes both DVD recorder and SD card reader for troubleshooting 3- to 10-inch lines with a full-size reel or 2- to 4-inch lines with a mini reel. Video or still images can be simultaneously recorded on both devices. An optional USB port is available. Features include built-in rechargeable battery for up to four hours of operation, 8-inch color LCD monitor, full keyboard, on-screen distance counter, built-in voice over, date-and-time stamp, LED dimmer control, camera test port and AC and DC power cords. The system includes a padded, 24-pound case that can stand alone or be mounted on a reel. 800/245-6200; www.drainbrain.com.

 

OEC Fluid Handling diesel exhaust fluid pumps

DWT Leader Pumps from OEC Fluid Handling are made for pumping diesel exhaust fluid (DEF) from drums, totes and aboveground or belowground tanks. The submersible and self-priming pumps are available in stainless steel and nonmetallic construction. 800/500-9311; www.oecfh.com.

 

Felling Trailers FT-80-3 galvanized trailer

The FT-80-3 over-the-road galvanized trailer from Felling Trailers and AZZ Galvanizing Services features 5-foot, self-cleaning angle iron beavertail, 5-foot by 20-inch self-cleaning angle iron spring assist ramps, toolbox with cover recessed in upper deck, 48-inch king pin height, 8-inch structural channel side rails, pierced 6-inch I-beam crossmembers on 16-inch centers, tread plate covered wheels and 16 bent D-rings. Options include three-section hydraulic ramp, 42-inch-wide by 11-inch bi-fold ramps, chain slots every 24 inches, stainless steel underbody toolboxes, 8-foot underbody mesh storage rack and 20,000-pound hydraulic winch in upper deck. 800/245-2809; www.felling.com.

 

HEMCO fiberglass trailer fenders

Fiberglass fenders from HEMCO Corp. are designed to eliminate road splash and spray on single- and tandem-axle trailers. Fenders are available in standard white, red, primer gray, black and custom colors. The rustproof, lightweight and corrosion-resistant fenders include mounting hardware. 800/779-4362; www.hemcocorp.com.


Related Stories