Tough Jobs

Challenging cleaning jobs and debris removal demand high-powered pressure washers, jetting equipment, combination units and hydroexcavators to cut through hardened scale and frozen ground, often in remote and hazardous locations where gas monitors and personal protective equipment and apparel are required to help ensure worker safety.

Arthur Products Co.

The flexible Centering Device from Arthur Products Co. conforms to damaged or deformed lines. Made from an aerospace elastomer, it can be trimmed in the field to fit lines from 2 to 8 inches in diameter. The device attaches to a 3/8- or 1/2-inch NPT hose and 3/8- or 1/2-inch NPT nozzle. 800/322-0510; www.arthurproducts.com.

Dialight

The SafeSite LED area light from Dialight is Class I, Division 2 certified for hazardous locations. The light has a low T5 temperature rating and is available in 180-degree forward-throw or 360-degree optics. Drawing 70 watts, the light delivers 5,500 lumens and replaces 250-watt HID light sources. It has an operating voltage range of 100-277 VAC and an assortment of mounting options for easy changeout from existing fixtures. The solid-state fixture is shock and vibration resistant and has a corrosion-resistant polycarbonate lens and polyester finish. The light is available in cool white and neutral white CCT and has a temperature operating range of -40 to 149 degrees F. 732/919-3119; www.dialight.com.

Related: Industry News - April 2011

Fibergrate Composite Structures

Fiberglass reinforced plastic molded gratings from Fibergrate Composite Structures feature rust-, rot- and slip-resistant floors and stairs. Grating is available with square or rectangular mesh in various resin formulations and grating configurations. The complementary Dynarail handrail and ladder system includes ladders, standard walk-through and safety cages. A retractable walk-through for manholes and pits is available. 800/527-4043; www.fibergrate.com.

Gamajet Cleaning Systems Inc.

The Gamajet VIII automated tank cleaning machine from Gamajet Cleaning Systems Inc. cleans frac tanks, vacuum tanks, totes and MPTs. Typically configured between 50 to 80 gpm and 120 to 150 psi, the cleaning system has a 12- to 15-minute cycle time. The system can be lowered into oil field tanks to blast away residue without the need for confined entry. The system is made of 316L stainless steel with 2-inch camlock inlet connection. 877/426-2538; www.gamajet.com.

Related: October Product News

GapVax Inc.

The MC Series combination vacuum and jetting unit from GapVax Inc. is made of 3/16-inch ASTM A572 Grade 50 Exten steel with 5- to 12-cubic-yard debris body (stainless steel available) and 2,000-gallon stainless steel water tank. The double-acting, single-lift cylinder provides a 50-degree dump angle. Vacuum pump options range from 3,500 to 5,000 cfm with up to 27 inches Hg. The wet-only vacuum truck is equipped with an 8-foot, front-mounted, telescopic boom with dual-lift cylinders, 26-foot reach and 270-degree rotation. The front-mounted hose reel has an 800-foot, 1-inch hose capacity. The standard water pump is rated at 80 gpm at 2,000 psi (other pumps available). Options include washdown system, hydroexcavation package, extra storage, heated boxes, liquid level load indicators, remote pendants and wireless remotes, additional work lights, tube racks and remote diagnostics. 888/442-7829; www.gapvax.com.

Subscribe: Want this great content delivered to your door? Subscribe now!

General Monitors Inc.

The PA4000 photoacoustic infrared gas monitor from General Monitors Inc. provides precise performance while eliminating interference from water vapors. The IR sensor monitors hydrocarbons, solvents, alcohols, CO2, CO and other gases. The monitor has a range of 0-1,000 ppm, depending on configuration, and is accurate to ± 2 ppm at 0-100 ppm and ± 10 percent of reading from 100-1,000 ppm. Features include sensitivity of 2 ppm and resolution of 1 ppm with specifications for other ranges. For certain gases, it detects concentrations as low as 0.01 ppm. The monitor has an operating range of 32 to 122 degrees F and storage range of -67 to 158 degrees F. It can be configured to monitor from up to eight remote areas. Other features include vacuum fluorescent display, audio alarm and four relays. 866/686-0741; www.generalmonitors.com.

GMI (Gas Measurement Instruments)

The GMI PS200 portable multi-gas detector from GMI (Gas Measurement Instruments) monitors and displays up to four hazardous gas conditions, including carbon monoxide, hydrogen sulfide, oxygen deficiency and a range of combustibles. Housed in a dust-proof case, the gas detector features one-button function and backlight for poor lighting conditions. The LCD screen displays battery life and real-time gas concentrations. It alerts the user of hazardous conditions through vibration, flashing LEDs and audible buzzer. Other features include man-down motion sensor, customized user identification code and calibration due date display. Data is downloadable to a docking station via USB. Options include auto bump and calibration station and built-in remote sampling pump. 713/559-9200; www.detcon.com.

Subscribe: Sign up for the GOMC E-Newsletter!

Guardair Corp.

The Mac Vac pneumatic vacuum unit from Guardair Corp. mounts on any vertical surface, including machine, pole or wall. The vacuum runs entirely off compressed air, eliminating the need for a motor and risk of sparking. Engineered for wet/dry applications, the vacuum has a liquid shutoff and drum drain. Features include steel wall bracket, 10-foot vacuum hose with 1 1/2-inch inlet, 4-gallon drum and 3/8-inch NPT inlet. Able to clean debris, metal chips, dust and fine powders, the vacuum operates at 86 decibels. It requires 25 scfm air consumption and delivers 70 scfm. 800/482-7324; www.guardaircorp.com.

Guzzler Manufacturing Inc.

The Predator liquid vacuum tanker from Guzzler Manufacturing Inc. is built to handle bulk liquids, sludge and semi-solid waste. The tanker combines high vacuum and pressure offloading and features 3,000-gallon payload capacity, vacuum pump capable of suction pressure up to 27-29 inches Hg, 400 cfm maximum airflow and 300 cfm at 18 inches Hg. Alternate pump sizes available. The single-compartment, carbon steel tank is rated for continuous maximum vacuum operation and 15 psi working pressure. Built in accordance with Section VIII of the American Society of Mechanical Engineers boiler code, the tank complies with U.S. Department of Transportation specification DOT412 for handling hazardous materials on the highway. 800/627-3171; www.guzzler.com.

Hammelmann Corp.

The zero emission process pump from Hammelmann Corp. hermetically seals fluids within the pump, preventing leakage during operation. The intermediate pump chamber can be outfitted with gas-tight covers for an atmospheric seal and charged with inert gas. The design ensures no fluids, vapors or gases escape to the atmosphere. 800/783-4935; www.hammelmann.com.

Hi-Vac Corp.

The Aquatech B-10 combination cleaner from Hi-Vac Corp. has a 360-degree rotating boom, tandem-axle chassis for maximum payload and single-engine operation of all systems. Features include 10-cubic-yard debris tank, high molecular density polyethylene water tanks and high-pressure, continuous flow water pump. 800/752-2400; www.hi-vac.com.

Hydro Tek

The high-output pressure washer from Hydro Tek delivers 5,000 psi at 4.7 gpm. The wash skid can be mounted to a truck or trailer with water tank for remote use. A wheel kit is available. Built to ISO 9001 quality standards for safe cleaning while operating in harsh weather and extreme mine environments, features include water-cooled Kubota diesel engine, one-fuel-source engine and burner, “pro-tect-it” frame and stainless steel panels and four-point harness for crane lift. The hour meter monitors run time for scheduling routine maintenance. 800/274-9376; www.hydrotek.us.

Jetstream of Houston

The X-Series mobile waterblast unit from Jetstream of Houston is designed for storage tank, pipe and heat exchanger cleaning in refineries and for drilling pipe, platform and storage tank cleaning in oil fields. Features include greaseless spread bearing PTO, integrated filter and water tank system, lightweight frame for easy towing and UNx system for conversion between 5,000 and 40,000 psi operating pressures. 800/231-8192; www.waterblast.com.

Mil-Ram Technology Inc.

The TA-2016MB digital Modbus RTU wall-mount gas detection controller from Mil-Ram Technology Inc. has an electrochemical/infrared/photoionization (PID) or catalytic sensor, 8/16 channel system with Modbus multi-drop network, auto-configuration wizard, auto-scrolling backlit LCD, SPDT-rated 10-amp relay outputs (low/mid/high/fault conditions), remote relay module option, digital output module option, digital input module and continuous advanced diagnostics. The controller features RS485 Modbus RTU serial network protocol, 110/220 VAC input power, 24 VDC, 6.4 A output power and 4-20 mA, RS485 interface options. 888/464-5726; www.mil-ram.com.

MSA North America

The V-Gard frame with debris control for slotted caps from MSA North America is made for waterblasting applications. The replaceable debris control creates a tight seal between the helmet and frame. The slotted design enables material to slide off the frame and out of sight. V-shaped alignment guides make for easy visor installation. Sliding adjustment blades allow the visor to work with most half-mask respirators, while stowable slot adapters allow the frame to work with or without earmuffs. 800/672-2222; www.msanorthamerica.com.

NLB Corp.

Diesel-powered 225 Series waterjetters from NLB Corp. are convertible to any of seven operating pressures (8,000, 10,000, 12,000, 15,000, 20,000, 24,000 or 40,000 psi) with flows from 6 to 82 gpm. Engine choices include 200, 235, 275 and 300 hp. Applications include drill pipe cleaning, tube and pipe cleaning, product removal, surface preparation, pavement marking and rubber removal, tank cleaning, tube bundle cleaning, concrete hydrodemolition and concrete and pipe cutting. 800/441-5059; www.nlbcorp.com.

Oldham

The CTX300 gas and oxygen detector from Oldham, an Industrial Scientific company, is designed for use in unclassified areas. Features include pre-calibrated sensors and onboard display. CSA compliant, other features include 2 mA signal for maintenance mode and signal lower than 1 mA for failure mode, lighted display, power-up indicator lights, maintenance or fault indicators, remote sensor for measurements in inaccessible areas and optional high-performance semiconductor-type detector. The unit is corrosion resistant with durable housing and polycarbonate and stainless steel mounting hardware. 800/338-3287; www.oldhamgas.com.

SPIR STAR

High-pressure hose containment grips from SPIR STAR are made of galvanized or stainless steel wire. Designed to protect personal and surrounding property in the event of a hose connection failure, grips can be installed during assembly or on site. 800/890-7827; www.spirstar.com.

StoneAge Inc.

Backout prevention safety devices from StoneAge Inc. are made for use with high-pressure waterblasting in pipes, eliminating the danger of tools building pressure and exploding backward. The devices allow tools and hoses to pass into a pipe while operating under pressure but not allow equipment to come back at the operator. Models are available for various pipe sizes and can be attached to pipes with or without flanges. 866/795-1586; www.stoneagetools.com.

Subaru Industrial Power Products

The 2-inch PKX201H high-pressure pump from Subaru Industrial Power Products is powered by a 6 hp Subaru EX17 engine and has a lift height up to 275 feet and maximum delivery volume of 127 gpm. Features include abrasion-resistant, large-diameter, three-blade impeller with replaceable wear plate for long life and low maintenance and cast iron volute to withstand suspended particles and small solids. 800/277-6246; www.robinamerica.com.

Super Products

The Mud Dog 1600 hydroexcavator from Super Products has a 16-cubic-yard debris body, 1,500-gallon water tank and rear-mounted boom with 335-degree rotation that can pivot down 25 degrees for eight extra feet of digging access. Features include water pressure to 18 gpm at 3,000 psi, 8-inch positive displacement vacuum system that provides up to 5,800 cfm at 28 inches Hg, onboard boiler for heating water to break up frozen, stubborn material and flush out material in tight spaces. Other features include winter recirculation, antifreeze and air-purge system, aluminum cabinet heated by dual 65,000 Btu/hour heaters, 2-foot tilt debris body and single-engine design. 800/837-9711; www.superproductscorp.com.

The Soil Surgeon Inc.

The Soil Surgeon hydroexcavating tool from The Soil Surgeon Inc. is designed to fit any sewer combination truck equipped with a telescopic 6- or 8-inch boom. The tool has a 1-inch water connection. The operator controls water pressure and power with truck controls. Features include 6-foot Tuff Tube with handles to guide the unit down for potholing or side to side for trenching. Six jets boring inward cut the soil, while six jets boring outward bring the tube down. Bumpers on the bottom protect the jets and lines the tool might contact. 949/363-1401; www.soilsurgeoninc.com.

Thompson Pump

The 6JCC high-head, clear liquids portable pump from Thompson Pump delivers 1,100 gpm with heads to 490 feet and 210 psi with unassisted priming and automatic re-priming. Clean water applications include water boosting, transferring, jetting, tank cleaning and fracking. 800/767-7310; www.thompsonpump.com.

TST Sweden AB

ProOperator personal protective equipment from TST Sweden AB is made for waterjet cleaning at pressures from 1,160 to 7,251 psi. Made from Dyneema, the protective apparel is designed to be comfortable and functional. www.tst-sweden.com.

Vacall

The AllExcavate hydroexcavator from Vacall delivers waterjetting pressure and vacuum forces for cleaning frac tanks, underground utility lines and dirt from drilling rigs and trucks. The 8-foot, 6-inch telescoping boom at the rear of the chassis has a 180-degree radius, enabling the unit to perform multiple jobs without repositioning. Features include single-engine operation, aluminum water tanks, powder-coated debris body (galvanized available) and interior tank flush system. Other features include dual-cyclone separator, AllSmartFlow control system (wired or wireless control) for precise adjustments and to monitor engine performance, water flow and vacuum functions. 800/382-8302; www.vacallindustries.com.

Vactor Manufacturing

The HXX-Hydro-Excavator from Vactor Manufacturing is designed for drilling mud reclamation, exposing and identifying underground utilities, slot trenching, frac tank and general tank cleaning. The unit handles pipe and line installation, potholing, waterline repair, directional drilling, sign and pole installation and other large volume excavation. Features include 12-cubic-yard debris tank, 1,200-gallon polyethylene insulated water tank for up to seven hours of continuous operation and 320-degree rotating boom. Heated pump cabinets and built-in boiler enable the unit to work on frozen ground in subzero temperatures. 800/627-3171; www.vactor.com.

Vacuum Sales Inc.

The All/Jet/Vac combination sewer cleaner from Vacuum Sales Inc. has a multi-stage vacuum filtration system for reduced maintenance. Available in a range of models, features include vacuum pumps ranging from 16 to 27 inches Hg and flow from 50 to 100 gpm at pressures up to 3,000 psi. Other features include front-mounted hose reel, telescoping boom, non-rust aluminum tanks, rugged debris body, durable and efficient control panel and decant offload. 800/547-7790; www.vacuumsalesinc.com.

Gas Oil & Mining Contractor