Hydroexcavators

Cusco

The Hydro-Trencher from Cusco is designed for hydroexcavating around oil and gas pipelines, installing fiber-optic cables, repairing utility lines or excavating in remote areas. The unit uses directional hydro-boring for the vacuum removal of liquids, sludge, slurries, mud, gravel and other solid waste. Standard features include cyclonic filtration technology and a vacuum system with airflow ratings of 3,500 to 5,500 cfm, generating 28 inches Hg of vacuum, as well as a wash pump capable of 18 gpm at 3,000 psi and high-pressure waterjetting. Tank volume is 3,000 to 3,500 gallons. Options include high-pressure wash system, stainless steel tank, heated valves, enclosed hot-water burner system and storage cabinets/standup lockers. The trencher series is available in a range of configurations to meet application needs. 800/490-3541; www.wastequip-cusco.com.

GapVax

The HV-55 HydroVax hydroexcavator from GapVax is made of 1/4-inch ASTM A572-Grade 50 steel. It features a 12 1/2-cubic-yard debris body and water tank options from 400 to 1,400 gallons. Other features include 5,250 cfm at 28-inch Hg positive displacement vacuum pump, five-cyclone filtration system and full-opening tailgate with field adjustable hinge, dual cylinders, and four individually adjustable locks to ensure a complete seal. Options include interior polymer coating throughout, cold-weather recirculation package, sludge pump, auger unloading system, body pressurization system, remote pendants and wireless remotes, washdown system and stainless steel body. 888/442-7829; www.gapvax.com.

Hi-Vac Corp.

The X-10 series of hydroexcavators from Hi-Vac Corp. has a 12-cubic-yard payload compartment and 1,000-gallon water capacity. Features include full-opening rear door with four self-adjusting hydraulic locks, power up and down for dumping, and full-power, 8-inch hydraulic loading boom with 340-degree operating range. Other features include a Hibon 8702 blower that delivers 5,250 cfm of free flow air and 27 inches Hg of vacuum. The Tri-Plex water pump is driven by a variable-flow hydraulic system to control water pressure and flow independently from the blower, and provides up to 18 gpm and 3,000 psi. The filtration system features dual cyclone pre-filters and 85 micron final filter for blower protection. The 700,000 Btu boiler is mounted in a heated enclosure for cold-weather operation. The enclosure also protects the water pump and hose reel from the environment, while the cabinet provides dry storage for tools and equipment. An X-15 model with 15-cubic-yard debris tank and 1,260-gallon water capacity is available. 800/752-2400; www.hi-vac.com.

Sewer Equipment Co. of America

The HX-12 RamVac vacuum excavator from Sewer Equipment Co. of America has a 12-cubic-yard debris tank, temperature-controlled environmental chamber and directional discharge system for offloading debris back into the excavation site. Other features include long-range wireless remote, NEMA 4 electrical system, 400,000 Btu boiler, three-stage cyclonic filtration system and 3,000 cfm blower. Applications include sensitive utility location and verification, remote digging, frozen ground excavation, subsurface utility engineering, pipeline crossing, potholing, trenching, debris removal and cleanup. 800/323-1604; www.sewerequipment.com.

The Soil Surgeon Inc.

The Soil Surgeon hydroexcavating tool from The Soil Surgeon Inc. is designed to fit any sewer combination truck equipped with a telescopic 6- or 8-inch boom. The tool has a 1-inch water connection. The operator controls water pressure and power with truck controls. Features include 6-foot Tuff Tube with handles fabricated to the tube to guide the unit down for potholing or side to side for trenching. Six jets boring inward cut the soil, while six jets boring outward bring the tube down. Bumpers on the bottom protect the jets and lines the tool might contact. 949/363-1401; www.soilsurgeoninc.com.

Super Products

The Mud Dog 1200 hydroexcavator from Super Products has a 12-cubic-yard debris capacity, 1,000-gallon water tank capacity with pump rated at 14 gpm at 3,000 psi. Features include onboard boiler for breaking up frozen ground, positive displacement vacuum pump with air flow rated at 5,800 cfm at 28 inches Hg. The rear-mounted telescoping boom can reach 19 to 27 feet, rotate up to 335 degrees and pivot downward 25 degrees. Ejector plate technology and the ability to raise the collector body two feet and tilt facilitates fast unloading and clean-out. 800/837-9711; www.superproductsllc.com.

Transway Systems

The HV-64 all-season hydroexcavator from Transway Systems features a Robuschi RB-DV145 6,400 cfm blower with direct-drive OMSI transfer case. The hydraulically driven Giant LP600 water pump delivers 10 gpm at 6,000 psi with the 1,000-gallon high-density polyethylene (HDPE) water tank supplying a 525,000 Btu diesel-fired burner. Two diesel-fired heaters warm the water pump and water tank compartments. The blower, silencers and water system are contained in a walk-in, insulated acoustical enclosure. The 3,000-gallon debris tank has a hydraulically operated hoist, full-opening rear door and door locks. The 26-foot, hydraulically operated 8-inch suction boom is equipped with joystick control, wired pendant control and wireless remote control. 800/263-4508; www.transwaysystems.com.

Vacall Industries

The AllExcavate hydroexcavator from Vacall Industries is designed to safely expose underground infrastructure, clean frac tanks, vessels and drilling rigs, and prepare surface areas for tie-in installation and repair, while using the chassis engine to provide power for vacuum and jetting. The unit features the AllSmartFlow CANbus system with controls located inside a protective cabinet, enabling operators to make precise adjustments using the programmable color LCD display that relates data about engine performance, water flow and vacuum. A proportional pendant, wired or wireless, provides control away from the chassis. 800/382-8302; www.vacallindustries.com.

Vac-Con

The X-Cavator with Power Flex Boom option from Vac-Con is available in 5- to 16-cubic-yard capacities with hydrostatically driven three-stage centrifugal compressors as standard equipment. A variety of hydrostatically or mechanically driven positive displacement blowers up to 28 inches Hg are available. The X-Cavator can be configured with dual positive displacement blowers with air flow up to 7,000 cfm. Low-volume, high-pressure water systems with up to 4,000 psi are available with cross-linked polyethylene (up to 1,500-gallon) water tanks. The Power Flex Boom extends to 28.5 feet, rotates 315 degrees, articulates up to 110 degrees and lifts up to 34 feet. Booms are available with up to 10-foot extensions and 8- and 10-inch tube diameters. 904/493-4969; www.vac-con.com.

Vactor Manufacturing

The HXX Hydro-Excavator from Vactor Manufacturing is designed for drilling mud reclamation, exposing and identifying underground utilities, slot trenching, frac tank and general cleaning. The unit also can tackle pipe and line installation, potholing, waterline repair, directional drilling, sign and pole installation and other large volume excavation. Offering up to seven hours of continuous operation with onboard water, the hydroexcavator has a 12-cubic-yard debris tank, 1,200-gallon superlinear XL Polyethylene insulation water tank, and 320-degree rotating boom. Heated pump cabinets and a built-in boiler enable the unit to work on frozen ground in subzero temperatures. 800/627-3171; www.vactor.com.

Excavators, backhoes

Ditch Witch

The XT855 excavator tool carrier from Ditch Witch has a 30 hp engine and lift capacity of 1,080 pounds when equipped with optional extension legs for leveling support in difficult digging conditions and uneven terrain. The excavator end has a 260-degree operating radius, enabling the machine to offset dig and deposit spoils anywhere within the swing arc. It also enables the operator to dig against footings, walls or fences without moving the machine. The unit's zero-turning radius and 50-inch width enables it to maneuver in tight spaces. 800/654-6481; www.ditchwitch.com.

JCB

The 8055 RTS mini excavator from JCB weighs 12,125 pounds, has a 44.4 hp Perkins engine for reduced fuel consumption, 75-inch dipper (59-inch and 68-inch available), dump height of 13 feet, 6 inches and dig depth of 12 feet, 4 inches. Single-acting auxiliary pipework to the dipper powers breaker attachments while optional double-acting pipework lets users switch between the two. Straight-line tracking provides precise control when positioning the excavator next to obstacles or during loading and unloading. 912/447-2000; www.jcb.com.

John Deere

K-Series backhoe loaders from John Deere are available in eight models (310EP, 310K, 310SK, 310SK TC, 315SK, 410K, 410K TC, 710K) and two track loader models (210 K EP, 210K). Features include an IT4/Stage III B John Deere PowerTech engine and five-speed transmission for road speeds up to 25 mph (AutoShift transmission available). The single loader lever with integrated electro-hydraulic auxiliary loader control eliminates the need for a second lever when using a multipurpose bucket. Other series features include auto idle, auto shutdown and keyless start. 800/503-3373; www.johndeere.com.

Volvo Construction Equipment

The PL3005D pipelayer from Volvo Construction Equipment features an excavator-based design for enhanced performance, versatility and transportability. The pipelayer has a 360-degree swing with full lifting performance and functionality at all radius positions. Other features include a mechanical, upper structure swing lock for working on severe grades. The undercarriage allows for counter-rotation of the tracks for easy positioning and directional change of the machine. High ground clearance enables the machine to work in rugged conditions. When not used for pipelaying, the machine can be used as an excavator by swapping the boom. 828/650-2000; www.volvo.com.

Skid-steers, track loaders

Gehl

The vertical lift V400 King skid-loader from Gehl has an operating capacity of 4,000 pounds, true vertical lift height of 144 inches to easily load high trailers and trucks and 9,150 pounds of break-out force. 800/628-0491; www.gehl.com.

Mustang

RT Series track loaders (1750RT, 2100RT) from Mustang feature the HydraTrac automatic track tensioning system that eliminates the need for manually tensioning tracks before operation. Other features include optimized radial lift boom for enhanced strength, optimal forward reach at trailer loading and dumping heights (127.5 inches maximum), flush rear door and angled rear towers for tight rear clearance radius and added visibility. Electronic engine control and foot throttle allow operation at partial throttle for reduced sound levels and fuel consumption. 800/628-0491; www.gehl.com.

Yanmar America Corp.

The T175 compact track loader from Yanmar America Corp. is powered by a 68.4 hp Yanmar diesel engine, measures 127.5 inches to hinge pin, has 18.5 gpm auxiliary hydraulic flow, 5,189 pounds of bucket break-out force and 1,750-pound ROP. The T210 model is powered by a 70.7 hp diesel engine, measures 128 inches, has 21.8 gpm hydraulic flow, 5,492 pounds of break-out force and 2,100-pound ROP. Both models feature the Auto-matic Track Tensioning System for continuous adjustment, one-piece undercarriage and welded, dedicated track system. 770/877-9894; http://us.yanmar.com.

Dumps, Accessories

DuraClass

The Alumax heavy-duty aluminum dump body from DuraClass has an 8-inch extruded top rail that resists bowing from heavy internal loads. The bottom rail includes an inside radius for faster and cleaner dumping, ties the deck, sides, crossmembers, vertical posts and outside dirt shedders together. Aluminum 5 3/4-inch I-beam longmembers have an integrated rubber track and rubber riser to reduce shock and noise. The 4-inch stacked U-shaped crossmembers provide extra load-bearing vertical walls. Crossmembers are on 12-inch centers and feature gussets at each crossmember. Options include oval light holes, center sliding patchgate and spill apron, as well as a variety of lengths and heights. 800/255-4345; www.duraclass.com.

Hall's Grade Blade

The Gradeblade excavator squeegee blade from Hall's Grade Blade slides over the teeth of any size bucket and has 30-degree wings for dirt control. Designed to reduce backfill time and leave a job site without teeth marks, the blade requires no tools to install. Made of 1/2-inch abrasive-resistant steel on the front and 1/2-inch hot roll steel on the back, the blade has a T-120 steel cutting edge. It is available in six sizes to fit any brand backhoe or mini excavator with four sizes for excavators 9 tons and larger (4, 6, 8 and 10 feet in length). 319/470-3033; www.gradeblade.com.

Ledwell

The 12/14 yard Tub Dump from Ledwell has a 42-inch side height and 52-inch tall tailgate. Features include 14-cubic-yard capacity, 35-ton head lift hydraulic cylinder, 1/4-inch AR400 steel front, sides and rear gate with 1/4-inch AR400 steel floor and continuous welded 26-inch radius corners. Other features include 8-inch channel long members, 1/4-inch AR400 steel cylinder housing, 3/16-inch steel sloped top rail with 6-inch wooden side boards and 10-gauge steel cab shield. 888/533-9355; www.ledwell.com.

SitePro

The SSGB-8A skid-steer grade blade from SitePro, a division of Worksaver, is designed for asphalt, landscaping and concrete flatwork. It has an 8-foot, six-way hydraulically controlled moldboard with 25-degree rotation/tilt. Features include in-cab remote for precise control, shear pin protection, reversible cutting edge and connection points for optional laser controls for grading accuracy. The unit includes 1/2-inch connect-under-pressure, flat-faced hydraulic couplers. End plate kits and laser pole kits are available. 217/324-5973; www.wssitepro.com.