Product News - September 2013 | Gas Oil & Mining Contractor

Subaru SGX commercial generators

SGX commercial generators from Subaru Industrial Power Products are powered by a Subaru EX overhead cam engine, made of heavy-duty steel and equipped with steel fuel tanks for longevity. The generators are CSA (Canadian Standards Association) certified. 800/277-6246; www.robinamerica.com.

NLB 1,000 hp convertible waterjetter

The 1005 Series 1,000 hp convertible waterjetter from NLB Corp. delivers from 4,000 to 20,000 psi. The two-model, diesel-powered series can be converted to five operating pressures and flows, up to 333 gpm. The jetters have a slow-running quintuplex plunger pump and internal gearing that eliminates the need for large pulleys or belts. Features include a forged steel crankshaft in heavy-duty mounted bearings and drive pinion output shafts on both sides of the pump to accommodate opposite-hand drive. All operating controls are mounted on a separate accessory manifold for extra protection. 800/441-5059; www.nlbcorp.com.

General Pipe Cleaners Typhoon trailer jet

The JM-2512 Typhoon trailer jet from General Pipe Cleaners delivers 12 gpm at 2,500 psi to clear grease, sediment and debris. The trailer jet has a 200-gallon holding tank, electric brakes, safety strobe light, safety cones, rear fold-down stabilizer jacks, retractable hose guide arm and antifreeze system. The unit is powered by a 24-hp Honda engine with 10-gallon fuel tank. 800/245-6200; www.drainbrain.com.

Related: Industry News - February 2013

US Jetting protective clothing

PrOperator personal protective clothing from US Jetting is made from lightweight and flexible Dyneema. The outer protective fabric is lined for comfort. Designed to protect against waterjetting hazards, the apparel meets OSHA safety standards. The clothing line includes gloves, aprons, trousers, hooded jackets and overalls with special features that protect the entire head. 800/538-8464; www.usjetting.com.

Trelleborg DBM clamp

The distributed buoyancy module (DBM) clamp from Trelleborg has a universal interface for use on all riser types and features aramid filters instead of a fabricated titanium strap. 800/626-2180; www.trelleborg.com/offshore.

Ditch Witch horizontal directional drill

The JT25 horizontal directional drill from Ditch Witch delivers 27,000 pounds of thrust and pullback and 4,000 ft-lbs of torque. Designed for installing utility pipe and cables up to 4 inches in diameter at lengths up to 500 feet, the drill features a rotational drive system and is powered by a 130-hp Tier 4i Cummins diesel engine. 800/654-6481; www.ditchwitch.com.

Worksaver John Deere skid-steer adapter

The John Deere loader to skid-steer adapter from Worksaver enables skid-steer type attachments to be used on tractors equipped with John Deere model 48/58 loaders and buckets retained by 1 1/4-inch pins. Features include an all-welded design and plated handles, spring and lock pins. 217/324-5973; www.worksaver.com.

Air Science vented enclosures

Vented enclosures from Air Science USA contain airborne particles during manipulation and transfer of potent compounds. The turbulent-free design utilizes ductless technology in combination with carbon/HEPA filtration. No additional HVAC is required. Custom sizes are available. 239/489-0024; www.airscience.com.

Nortech pneumatic vacuums

ATEX-approved pneumatic vacuums for hazardous locations from Nortech Vacuum Products, a division of Guardair Corporation, eliminate the threat of static electricity by combining static conductive design with pneumatic technology. The vacuums are approved for use in Class 1, Group A, B, C and D; and Class II, Groups E, F and G; as well as ATEX zones 1, 2, 21 and 22. The vacuums run off compressed air and are available in 30- and 55-gallon drum units. 800/482-7324; www.guardaircorp.com.

Alfa Laval dust recovery system

The Vortex dust recovery system from Alfa Laval limits the amount of wasted mud additives emitted into the environment as dust during pneumatic transport. Powered additives collect in receiving storage vessels (PD tanks), while the air that propels the bulk powder to the vessel is vented to the recovery system. Pneumatically controlled 4-inch slide gate valves are positioned between the bottom discharge of each air cyclone and the 4-inch ports on top of the collection vessel, providing a seal for pressuring up and transporting the collected product. Level detectors with flashing signal lights indicate when the collection tank is full. 804/222-5300; www.alfalaval.us.

Mustang 4000V vertical-lift skid-steer

The 4000V vertical-lift skid-steer from Mustang, powered by a 99 hp Cummins engine, has a rated operating capacity of 4,000 pounds, true vertical lift height of 144 inches and breakout force of 9,150 pounds. 800/628-0491; www.gehl.com.

HammerHead pneumatic rock hammer

The Roughneck R400 pneumatic rock hammer from HammerHead Trenchless Equipment includes air hammer, 5.25-inch straight and offset bits, pullback kit, control station/oiler, drill conversion kit and universal HD high-flow rock drill housing. The hammer is designed to drill up to 150 feet per hour. The offset rock bit design provides precise steering, enabling the operator to navigate a variety of ground conditions. 800/331-6653; www.hammerheadtrenchless.com.

Subscribe: If you don't want to bring your iPad into the bathroom, we can send you a magazine subscription for free!

Advantage PressurePro intelligent tire monitor

The Flex Intelligent Monitor tire pressure monitoring solution from Advantage PressurePro enables users to set custom reference pressures and custom temperature alert levels. 816/887-3505; www.pressurepro.us.

Gehl V400 vertical-lift skid loader

The V400 vertical-lift skid loader from Gehl has a rated operating capacity of 4,000 pounds, true vertical lift height of 144 inches and breakout force of 9,150 pounds. 800/628-0491; www.gehl.com.

Knipex retaining ring pliers

Retaining ring pliers from Knipex Tools L.P. are available in several variations for use on a range of ring sizes and styles. The pliers are made for continuous use and feature high-density spring steel tips inserted into the forged body for strength and longevity. Pliers are available in internal and external styles; straight or 90-degree angles. 847/398-8520; www.knipex-tools.com.

Subscribe: Save the trees for beavers, sign up for our E-Newsletter!

Fontaine Revolution Dropdeck aluminum trailer

The aluminum Revolution Dropdeck trailer from Fontaine Trailer Co. weighs 8,600 pounds and features one-piece extruded aluminum side rails and unitized design for increased tire wear, fuel economy and added stability. 800/821-6535; www.fontainetrailer.com.

Adalet stainless steel explosion-proof instrument enclosure

The XIHNS stainless steel, explosion-proof instrument enclosure from Adalet has a 4 1/16-inch bored throat opening, two solid covers and two glass cover options to accommodate various instrument depths. The glass cover has a 3.31-inch viewing window and low profile/tab-free retaining ring for maximum instrument clearance. 216/267-9000; www.adalet.com.

Dust Control Technology dust suppression ring

The DustBoss DB-R dust suppression ring from Dust Control Technology is designed for use at material discharge points, creating a liquid curtain around the outflow for particle containment. Available in nine sizes from 17 to 100 inches, the stainless steel rings withstand pressures to 900 psi. 800/707-2204; www.driboss.com.

Ergodyne flame-resistant cooling bandana

The Chill-Its 6700FR evaporative, flame-resistant cooling bandana with polymers from Ergodyne is made from Modacrylic cotton-blend fabric with flame-resistant thread and designed to meet ASTM standard F2302. The reusable cooling bandana, available in blue and high-visibility lime, is activated by soaking in water for two to five minutes and lasts four hours. 800/225-8238; www.ergodyne.com.

McCloskey tracked trommel

The 516RT tracked trommel from McCloskey International has a heavy duty chassis with four independent stabilizer jack legs, integrated hydraulic folding conveyors and radial conveyor with 180-degree swing that delivers 13-feet 6-inch stockpile height. Powered by a CAT C4.4 100-hp engine, the unit has an over-sized hydraulic tank and hydraulic oil cooler for maximum cooling capacity and high efficiency throughout the hydraulic system. Other features include a 7-cubic-yard hopper, 5- by 16-foot screening surface, remote control hydraulic tipping grizzly and ground adjustable brushes. 877/876-6635; www.mccloskeyinternational.com.

Stellar sliding-job hooklift

The Slider20-S hooklift from Stellar Industries has a 20,000-pound capacity, 72-degree dump angle and can handle 10- to 14-foot containers and up to 16-foot flatbeds. Hook height options include fixed 35.63 inch, fixed 54 inch and hydraulically adjustable 35.63 to 54 inch. Other features include hexagonal boom for added strength, zinc-plated pins to prevent corrosion, bushings and grease zerks at pivot points and secure hose track for the hydraulic adjustable job. 641/923-4248; www.stellar-industries.com.

Felling compact loading trailer

The compact loader trailer line from Felling Trailers is designed to haul a mini skid-steer and attachments. The trailer has solid steel pan-style sides with multiple D-rings. Models FT-6 CL, FT-10 CL and FT-12 CL have a gross vehicle weight rating of 7,000 to 14,700 pounds. Features include full, spring-assist mesh ramp, attachment mounts, removable trencher/auger tray, auger bit holders, land leveler or bucket rest and pallet fork holders with hold-on chains. 800/245-2809; www.felling.com.

Manitou vertical masted forklifts

M Series (M 30-2, M 30-4, M 50-2, M 50-4) vertical masted forklifts from Manitou Americas feature Tier IV certified engines (74-hp Perkins) and 2- and 4-wheel drive. The M 30 has a lift height of 23 feet and the M 50 has a lift height of 19 feet, 8 inches. Lift capacities are 6,063 pounds on the M 30 and 11,023 pounds on the M 50. www.manitou-group.com.

Orenco prefabricated fiberglass shelters

Prefabricated fiberglass shelters from Orenco Systems are designed to house and protect mechanical and electrical controls, process equipment, chemicals and workers. Standard sizes are 8 feet tall, 4- to 16-feet wide and up to 42 feet long. Custom widths and heights are available. Shelters are made of foam-core fiberglass walls, close-molded for a watertight bond and coated with UV-stable gelcoat. Roofs can handle up to 100 psf and, when properly anchored, resist winds up to 130 mph. Standard walls and ceilings range from 2 to 4 inches thick with insulation values of R12 to R24. 800/348-9843; www.orenco.com.

GammaTech Durabook TA10 tablet

The Durabook TA10 rugged tablet from GammaTech Computer Corp. is designed for demanding industrial and field applications. It has an ultra-high brightness 10.4-inch LCD display with LED backlight, resistive multi-touch panel with tempered glass, sunlight-readable panel, digitizer with active stylus, Intel Ivy Bridge processor, Bluetooth and Wi-Fi connectivity and two six-cell battery backs. The tablet meets military standard 810G for drop and shock resistance and IP65 for dust and water resistance. 800/995-8946; www.gammatechusa.com.

Rain for Rent TDH calculator app

The TDH calculator mobile app from Rain for Rent can be used by engineers, field operators and technicians to determine pump selection. The free app can be downloaded from iTunes. 800/742-7246; www.rainforrent.com.

Hutte self-contained hydraulic crawler drill

The HBR 202 Hutte Nohrtechnik self-contained, fully hydraulic crawler drill rig, distributed by Atlas Copco Construction Mining Technique USA, has an upper structure that rotates 140 degrees left and right. The 3-speed, low-profile rotary head provides 21,000 ft-lbs of torque. Available in electric- and diesel-power versions, the drill can be radio remote controlled. The telescopic drill mast has a feed length of 4 to 8 feet with a feed force of 8,500 pounds and pullback of 14,000 pounds. All drill movements from tramming to mast positioning are controlled though a 32 gpm load sensing piston pump. 800/732-6762; www.atlascopco.us.

Thomas & Betts induction lighting fixtures

Hazlux induction lighting fixtures from Thomas & Betts include Fulham induction electronic ballast and lamps that deliver 100,000 hours of warm, white light. Operating range is -65 to 104 degrees F. The extreme-cold option operates at temperatures to -85 degrees F. The lighting fixtures are suitable for use in Class 1, Zone 2, Groups IIA, IIB, IIC, Exn RII T3 (restricted breathing) and Division 2 Groups A, B, C, D areas. They also are rated for explosion-proof areas: Class 1, Division 1, Groups C, D, and Class II, Division 1 and 2, Groups E, F, G. 901/252-5000; www.tnb.com.

Amthor smartphone app

The smartphone app from Amthor International enables users to access stock and pre-owned units, locate dealer and repair facilities, services, news, product trade-in forms, product line literature, product training and informational videos. The app is compatible with both iPhone and Android phones and can be downloaded through the Apple App Store and Android Market. 800/328-6633; www.amthorinternational.com.

SEI collapsible frac trank

The HIPPO collapsible, pillow-style frac tanks from SEI Industries store 50,000 gallons, require little site preparation, are environmentally friendly and can be quickly set up. The tanks have an abrasion resistance of 73,000 cycles. 855/734-8265; www.sei-ind.com.

Victaulic direct groove, two-piece coupling

Rigid and flexible Advanced Groove System couplings from Victaulic are designed for piping systems up to 60 inches in diameter, install in less than an hour and offer pressure ratings up to 350 psi. 610/559-3300; www.victaulic.com.

Hyundai Interim Tier 4 product class excavators

The R480LC-9A and R520LC-9A production class crawler excavators from Hyundai Construction Equipment Americas are powered by low emission, low-noise, 352-hp Cummins Interim Tier 4/Stage IIIB QSX11.9 engines. The excavators have an operating weight of 108,420 (480LC-9A) and 114,820 pounds (520LC-9A), bucket breakout force of 54,950 and 62,050 ft-lbs, maximum dig depth of 27 feet, 9 inches and 26 feet, 11 inches. The cab seat, console and armrest settings are fully adjustable. 877/509-2254; www.hceamericas.com.

Endress+Hauser thermowell sizing calculator

The online thermowell calculation tool from Endress+Hauser is designed to help stay compliant with ASME PTC 19.3 TW-2010 thermowell standards. The sizing tool calculates the thermowell’s ability to withstand stresses under given process conditions. 888/363-7377; www.us.endress.com.

Little Beaver soil sampling tools

The portable Big Beaver auger drill rig (26 inches wide and 80 inches tall) with optional SSK-1 kit from Little Beaver is designed for standard penetration testing and limited access. The rig is available with a 20-hp gasoline engine and can be used with other hydraulic tools, including concrete saws, breakers, tampers and chain saws. One person can maneuver the two-wheeled unit through gates and doorways. The SSK-1 kit includes an additional hydraulic valve, Cathead and tower kit with stabilizing legs. It can be used with Little Beaver’s AWJ drilling rod and 24-inch split spoon sampler. 800/227-7515; www.littlebeaver.com.

Want more stories like this? Sign up for alerts!