The Global Petroleum Show 2014 will showcase the most innovative products and services from all aspects of the oil and gas industry.
The Global Petroleum Show is the annual meeting place for the global oil and gas industry, bringing together global producers, EPCs, service companies and suppliers. Held in Calgary, Alberta, June 10-12, the event plays host to 95 countries, 63,000 attendees, and 2,000 exhibiting companies showcasing the newest and most innovative products and services related to the industry.
Here’s a look at just a portion of the products and services that will be featured this year.
Aerotech Herman Nelson
Flameless heaters from Aerotech Herman Nelson deliver high volumes of heat with static pressure. They are John Deere diesel driven, and include dual axles, gravel guard to the tank, spill containment, four corner tie-down hooks, a stainless steel bolt kit, a three-function operational indicator light, a site-friendly master shutdown system, a block heater-battery blanket with one-step connect and a lighted interior with master electrical shutdown switch. They are master controller operated with easy startup/shutdown procedures. The automated louver system ensures correct outside air balance at all times without manual adjustment. 800/486-4328; www.hermannelson.com.
AGC Chemicals Americas
AFLAS 100 Series fluoroelastomers from AGC Chemicals Americas create super-tough seals (bladders) for electrical submersible pump systems (ESPs) that allow them to withstand bottomhole conditions, including temperature, pressure and corrosive elements inherent to oil recovery. They are copolymers of tetrafluoroethylene and propylene with high molecular weights, which impart durability and deliver ideal performance in compression set, high strength and sour gas resistance. They are also suited for producing durable packers, gaskets and O-rings. 800/424-7833; www.agcchem.com.
Alpha Technologies
The Micro 350 rugged, compact all-in-one outdoor UPS solution from Alpha Technologies can be used wherever clean backup power is needed. It ensures equipment used in SCADA communication, utilities and many other critical applications (microwave repeaters, radios, MUX and routers, fiber ONT, WiFi/MESH, DAS, voice and data, ground and environmental sensors, flow monitoring systems) remain safe and protected from unexpected power disturbances. The highly configurable unit comes in multiple AC voltage models (120 and 230 Vac), has remote communications and provides the flexibility to add batteries for greater runtime. 800/667-8743; www.alpha.ca.
Blackmer
XL Series Sliding Vane Pumps from Blackmer meet the unique handling characteristics of crude oil that is produced from shale formations. They meet the needs of shale-oil transfer, especially into and out of storage tanks, railcars and transport trucks, because their sliding-vane design allows them to self-adjust to maintain required flow rates, even when handling thinner liquids. They have ideal self-priming and dry capabilities, and are available in five sizes from 1.25 to 4 inches, with flow rates from 17 to 345 gpm. They offer working pressures up to 350 psi in temperatures to 300 degrees F. 616/241-1611; www.blackmer.com.
BLACOH Fluid Control
SENTRY XPA high-pressure pulsation dampeners from BLACOH Fluid Control provide protection for pumping applications, with corrosion-resistant 316L stainless steel solid shell casings and positive threaded caps. They have PTFE bellows, and have high chemical and thermal resistance and flex life, withstanding temperatures from -20 degrees up to 220 degrees F. They are rated up to 10,000 psi. CRN models are available. 800/603-7867; www.blacoh.com.
Boerger
Rotary lobe pumps from Boerger offer flow rates up to 5,000 gpm and pressures up to 200 psi. They are used for crude oil, produced water, polymer with low shear, drilling mud, cuttings, knock-out condensate, fuel oil, refined products and waste oil. Their Maintenance in Place design allows for all wetted parts to be easily replaced through the front cover without the removal of pipe or drive systems. 612/435-7300; www.boerger.com.
Derrick Solutions International Canada
The Hyperpool shale shaker from Derrick Solutions International Canada can adapt to ever-changing drilling conditions, while providing a platform that is easy to operate and maintain. With a compact footprint, high processing capacity and low maintenance cost, it is suited for all drilling applications where drilling performance and rig modularity are required. 780/612-0020; www.derrick.com.
Foremost Industries
The Model F300T hydraulic top drive from Foremost Industries has a hoisting capacity of 300 tons, pull-down capacity of 20 tons, and an API bearing rating of 300 tons (3,000 hours at 100 tons). It offers 34,480 ft-lbs of breakout torque, 31,035 ft-lbs of drilling torque, a maximum speed of 200 rpm, and 5,000 psi maximum drill fluid pressure. It has a Quill ID 3-inch full through bore, and full 360-degree continuous pipe handling. 800/661-9190; www.foremost.ca.
Gas Clip Technologies
The portable Multi Gas Clip from Gas Clip Technologies uses a low-power infrared sensor that allows the detector to run for two months without a charge. The IR sensor does not require oxygen, detects combustible hydrocarbon gases, and uses a single button for easy operational use. It has bump/calibration reminders and has a recommended calibration frequency of six months. There is also an option of programming multiple user IDs. 972/775-7577; www.gascliptech.com.
GIW Industries
Hydrocyclones from GIW Industries have a long-wearing design and offer a replacement apex that can be fitted to existing equipment. The apex is the highest-wear part of the cyclone, as that section is subjected to a high concentration of coarse solids travelling at high velocities. Rebuild time is reduced from hours to minutes, and hydrocyclones also include wear detection holes for preventive maintenance, and five tie rods with two clamps. Apex kit replacement parts only require two clamps and four bolts. 706/863-1011; www.giwindustries.com.
Hammelmann Corp.
Series 5Zero Emission pumps from Hammelmann Corp. hermetically seal fluid within the pump, preventing atmospheric leakage during operation. They have a minimal footprint, which is the result of combining a compact integral speed reduction gear end with vertical configuration. The vertical configuration channels oscillating forces directly downward into the base structure, eliminating lateral oscillation. Units can be utilized for the injection of methanol, LDHI, glycol and a range of inhibitors. 800/783-4935; www.hammelmann.com.
IAC Acoustics/Silex Innovations
The 201VO Series emission control unit from IAC Acoustics/Silex Innovations is available in standard and customized options. The body is all welded heavy-duty carbon steel with easy access to catalyst filters for quick installation/removal. It can be used as a passive system utilizing an oxidation catalyst element to provide HC, aldehyde and CO abatement with visible smoke and exhaust odor reduction for diesel, lean-burn natural gas and LPG engines. It can also utilize nonselective catalytic reduction (NSCR) to reduce NOX and oxidize CO and HC from rich burning gas engines operated at or very close to a stoichiometric air/fuel ratio. 905/612-4000; www.iac-acoustics.com.
John Deere Power Systems
The PowerTech PSS 13.5L diesel engine from John Deere Power Systems is part of the company’s Final Tier 4/Stage IV lineup. It has series turbocharging and an integrated emissions control system consisting of cooled exhaust gas recirculation, a diesel oxidation catalyst and diesel particulate filter, and selective catalytic reduction. It includes full-authority electronic controls, a four-valve cylinder head, a high-pressure fuel system, turbocharging and an air-to-air aftercooling system. It offers power ratings of 414 to 600 hp. 800/533-6446; www.johndeere.com/jdpower.
Lind Equipment
The powerful, portable Beacon360 LED area light from Lind Equipment lights up 360 degrees, providing bright LED light to an entire area, making it ideal for remote area lighting, construction sites and shutdowns. It can replace up to a 400-watt metal halide light. Its 360-degree design provides light in all directions, including upwards. It doesn’t give off dangerous heat, does not require bulb changes and starts up instantly. It can come mounted on a tripod, magnet mount or scaffold clamp. 877/475-5463; www.lindequipment.net.
Lynden Incorporated
Lynden Incorporated provides freight transportation solutions over land, on water, in the air, or in any combination, to challenging areas such as Alaska, Canada and Russia, or anywhere in the world as needed. Their family of companies delivers a total freight transportation package. Employees deliver quality service while putting the customer first and doing their best. 907/245-1544; www.lynden.com.
Miller Electric Mfg. Co.
The ProHeat 35 induction heating system from Miller Electric Mfg. Co. provides a fast, safe and consistent heating method for pre- and post-weld heat treatment to help minimize the risk of weld failure due to hydrogen-induced cracking in high-strength steels. It brings a component to temperature in a short time, and holds the part at a specified temperature. The efficient induction heating technology also eliminates the need for an open flame and the costs and hazards associated with propane. 920/734-9821; www.millerwelds.com.
MMD Equipment
The Hybrid Dual Fuel PowerPro HDF150 mobile generator from MMD Equipment is powered by diesel and/or natural gas, offering lower operational costs and substantial fuel savings compared to the standard, diesel-powered model. It is powered by an Isuzu diesel engine, and delivers up to 150 kVA. It can run up to 50 hours on a full load before refueling is required. A Lynxrite heavy-duty trailer is available for easy towing. 818/909-7541; www.mmdequipment.com.
Nidec Motor Corporation
The U.S. Motors 5812 vertical TEFC line from Nidec Motor Corporation satisfies the industry need for a high horsepower, totally enclosed electric motor that requires less service and gives less variation in design. The 5812 full cast-iron frame does not require cleaning of cooling tubes or filters and performs consistently. It is ideal for oil and gas applications, and can be ordered with many features that are required by API 547. 888/637-7333; www.usmotors.com.
Norseman Structures
F-Series 62- by 136-foot buildings from Norseman Structures can be used to cover pump stations, such as this one in Alberta, Canada. The buildings are erected from the outside, over the pumps. The structures are engineered and designed with 33-foot-high sidewalls using wide-flange columns for legs. Each was designed to accommodate a 15-ton bridge crane, attached to the wide flange columns of the building, used for pump maintenance. A combination of passive and powered ventilation is being used to exhaust the heat generated by the pumps inside the buildings. 855/385-2782; www.norsemanstructures.com.
Osprey Informatics
The Osprey Reach cloud-based visual monitoring platform from Osprey Informatics gives customers visual access to their field operations from anywhere, over any device. Built for the oil and gas industry, it has an easy-to-use Web interface, is fully mobile and scales at an enterprise level. 403/460-4779; www.ospreyinformatics.com.
PDL Contact Centres
The DeLorme inReach satellite communicator from PDL Contact Centres offers a reliable two-way connection for routine or emergency communication on a global network. It connects and protects employees that work off the grid, offering a two-way connection for added peace of mind in critical situations and embedding precise location coordinates in sent messages. It maintains signal lock even in difficult GPS environments. When used with a smartphone or tablet, it becomes a productivity tool, enabling users to send and receive text messages to and from any cell number or email address. Communicators are designed to withstand the rigors of outdoor use. 877/997-3522; www.pdlcc.com.
Powerblanket
Pressure transmitters (PT) and instrumentation heaters from Powerblanket ensure the functionality of instrumentation gauges down to -58 degrees F. Heaters are custom designed to fit on any pressure transmitter, no matter the size and shape. They have a durable outer vinyl shell with cinch straps that hold them securely in place. They can be installed and removed quickly, and can be manufactured to meet CID2 hazardous location requirements. 877/927-6432; www.powerblanket.com.
RedGuard
LeaseFleet’s proven blast-resistant buildings from RedGuard are offered in two widths and a variety of lengths. Each building adheres to API 752/753 and meets the criteria for a low to medium response rating (low damage) by the American Society of Civil Engineers. Available in configurations ranging from office complexes to tool storage and shower facilities, cold-weather packages are available to provide optimum productivity in harsh environments. For a more permanent solution, SafetySuite, a line of completely customizable blast-resistant buildings, is available. 855/733-4827; www.redguard.com.
SPX
Plenty Side Entry Mixers from SPX are for basic sediment and water, blending, homogenizing and temperature uniformity duties. The motor is adjusted for belt tensioning. Hardware is protected against atmospheric corrosion. Drive is by a fire-resistant antistatic toothed belt to transmit motor power. The pulleys have taper lock bushes for ease of removal and are enclosed in a weatherproof guard. The mixer frame casting houses sealed-for-life bearings. The flange incorporates a mechanical seal with a tank shut-off device allowing maintenance under full tank conditions. Belt and gear mixers are available in both fixed- and swivel-angle models. 800/252-5200; www.spxft.com.
SynergyDesk Software
The SynergyDesk Software platform is a simple, integrated oilfield inventory and operations management solution. From engineering to purchasing, manufacturing to sales, operations to project management, HSE to management dashboards, and satellite-based real-time GPS asset tracking, it is an easy-to-use, all-inclusive enterprise solution that manages the complete life cycle of inventory and supports any accounting system already in place. 780/800-1900; www.synergydesk.com.
Teledyne Isco
Series D single-pump systems from Teledyne Isco consist of a controller and pump module. The piston-driven pump module uses a single speed gear train. Nitronic 50 is the standard material for cylinders, pistons and caps, with Hastelloy and other alloys available for greater chemical resistance. Standard seals are graphite-impregnated Teflon, providing long life under harsh operating conditions, with optional seals available for special applications. Standard operating modes include constant flow, constant pressure, flow or pressure programming, and external control. 800/228-4373; www.isco.com.
Victaulic
The Series 727 high-pressure, enhanced port, NACE-compliant ball valves for upstream oil applications from Victaulic have grooved ends, and are joined using Victaulic couplings, enabling quick and easy installation and maintenance. They are designed for full open or shut-off service, accommodate pressures of up to 1,500 psi, and are available in sizes ranging from 2 to 6 inches. 800/742-5842; www.victaulic.com.
Volvo Construction Equipment
The PL4809D rotating pipelayer from Volvo Construction Equipment offers stability with a 90-ton lifting capacity, and a 360-degree swing capability to handle large, heavy pipes and place them anywhere around the machine. Its excavator-based design allows it to be converted into a high-performance excavator by swapping the pipelayer boom for the excavator boom. A solid footing is secured by 30-inch tracks, with optional 36- or 41-inch tracks for added stability and lower ground pressure. The extra-wide undercarriage is retractable, enabling the user to reduce the width for road transportation. Wireless sensors on the hook, boom and base machine feed data to an in-cab computer, which calculates and displays actual and related working loads in real time. 828/650-2000; www.volvo.com.
Weidmuller
With real-time compatibility, media converters from Weidmuller can integrate glass fibers into a network while remaining transparent to other network devices. They convert the Ethernet, via an RJ45 port, to an optical port with SC or ST glass fiber connections. Link Fault Pass-Through (LFP) technology employs mechanical relay outputs that alarm on power failure and port breakages on either fiber or Ethernet ports. The LFP feature retains the collision domain between the two Ethernet participants, resulting in status transparency between the two interfaces. Redundant power inputs allow for more secure connections. They have cULus Class 1 Div 2/ Zone 2, ATEX and GL approval. 800/268-4080; www.weidmuller.ca.
Weir Oil & Gas
The SPM safety iron eight-station manifold skid from Weir Oil & Gas provides users with a compact manifold system utilizing the features of a manifold trailer with a small footprint for use in regions where transport of larger manifold trailers is challenging. It can be easily transported and loaded/unloaded from a flatbed trailer utilizing a winch. The modular design, coupled with the high-pressure iron mounted above the low-pressure manifold enhances the serviceability of the high-pressure system during maintenance cycles. The lower profile of the high-pressure iron also increases safety for the user as actuating the isolation valves can be achieved more efficiently. 800/342-7458; www.weirinaction.com.
Comments