Transporting hundreds of barrels of frac water, contaminated soil or other environmentally harmful materials can be time-consuming and costly when your destination is hundreds of miles from the nearest disposal site. Leak-proof steel frac and rubberized bladder holding tanks enable you to store oil, mud and other contaminants on site until they can be safely and efficiently transported. A variety of standard and customizable storage devices in easy-to-clean designs are available to meet your most demanding waste-handling needs.
Aero Tec Laboratories Inc.
The ATL FueLocker bladder tank from Aero Tec Laboratories Inc. is designed for temporary or long-term storage of fuels and oil. Applications include emergency response cleanup or as an auxiliary fuel source for power generators, diesel or gasoline engines and heavy equipment. The tank holds 100 gallons (up to 500-gallon and custom sizes available) of gasoline, E-10 bio-ethanol, diesel fuel, biodiesel, jet fuel, kerosene, aviation gas, No. 2 and No.4 fuel oil and lubricants. Measuring 43 by 43 by 14 inches, the bladder tank is made of military-spec rubberized fabric. Safety features include a vent valve in the fill cap that automatically relieves pressure in case of excessive heat or overfill. A flapper valve at the fill pipe base prevents possible backflow when the cap is removed. When not in use, the bladder can be rolled or folded for storage. 800/526-5330; www.atlinc.com.
BakerCorp
Frac tanks from BakerCorp are made of 1/4-inch ASTM A36 carbon steel and hold up to 21,000 gallons. Tanks can be manifolded for larger projects. Designed for well fracturing and oil field applications, the tanks feature a fixed-axle for staging in tight locations. The V-bottom floor, smooth walls and front and rear valves provide easy cleanout. Other features include 22-inch manways on the top, front and side. Tanks are available unlined or with a chemical-resistant coating. Each tank is tested to meet NESHAP and OSHA standards. 800/635-7349; www.bakercorp.com.
Bucks Fabricating
Roll-off style vacuum tanks from Bucks Fabricating, available in 20- and 25-yard sizes, are made to safely transport and store hazardous and nonhazardous (wet or dry) materials such as oils, sludge, chemicals, liquid waste, slurry, fly ash, mud, drill turnings and other materials. Featuring 1/4-inch walls, tanks have fully welded seams for maximum strength and fully gasketed doors tested against leakage. Apertures and manways can be added. 800/233-0867; www.bucksfab.com.
Custom Manufacturing Inc.
Sludge containers from Custom Manufacturing Inc. are designed for collecting, storing and transporting a variety of waste, including oil- and water-based mud and cuttings, contaminated soils and sludges. When pits aren’t possible, containers can be used with shaker or centrifuge setups. Containers are completely enclosed to prevent spillage. Features include continuously welded seams, fully gasketed rear door and lids, knife-edge seal, adjustable hinges and ratchet binders. Fully water tested, containers have 3/16-inch walls, bulkheads, rear doors and floors. Bins also can be made with dewatering floor and side-hinge rear door. 888/692-6311; www.custommanufacturing.us.
DEL Tank & Filtration Systems
Mix tanks from DEL Tank & Filtration Systems are available in 1,000- to 33,000-gallon sizes. The 400-barrel, bullet-style tank is designed for uniform solid suspension and mixing that eliminates buildup. Features include four 10-hp mixers, round bottom and smooth walls. 800/468-2657; www.deltank.com.
Dragon Products Ltd.
Model 500-barrel, cross-catwalk corrugated wall liquid storage tanks from Dragon Products Ltd. feature minimum 15-mil DFT chemical-resistant liners. Tanks have a connecting catwalk system with front access ladder for easy inspection that allows for multiple connections. Tanks are made from 1/4-inch corrugated steel, steel shot-blasted and covered inside and out with a painted durable lining and undercoated floor. 800/231-8198; www.dragonproductsltd.com.
Flo Trend Systems Inc.
Roll-off containers from Flo Trend Systems Inc. are designed to be watertight and feature gasketed, hinged rear-opening doors. Standard gaskets are made from a neoprene/SBR blend. Other materials, such as nitrile, are available for compatibility with various fluids. Container sizes range from 15 cubic yards (3,000 gallons) to 40 cubic yards (8,000 gallons). Lid options include peaked roofs with hatches, side-to-side rolling lids, over/under sliding lids, and side-to-side rolling tarps. Containers can be made for standard cable and hoist roll-off truck pick up, hook-lift or other designs. Standard containers are sandblasted and feature two-part epoxy primer and urethane coating. Other coatings are available. 713/699-0152; www.flotrend.com.
GapVax Inc.
The SV32 roll-off, skid-mounted vacuum system from GapVax Inc. is made for oil field and refinery use. Constructed of Exten steel, the unit is blasted, primed and painted with industrial-grade urethane paint. The interior is polymer coated. The unit is designed as an all-inclusive wet/dry system, featuring a moisture trap (scrubber), two cyclones and filter baghouse. The baghouse has 30 polyester filter bags and 30 heavy-duty galvanized steel hi-vac cages. Delivering up to 3,800 cfm at 28 inches Hg, the unit has an electric or diesel drive system. 888/442-7829; www.gapvax.com.
Husky Portable Containment
Flexible frac pillow tanks from Husky Portable Containment can store water, brine or oil. Lighter than steel tanks for easier transport, capacities range up to 1,100 barrels (50,000 gallons). Made from XR and urethane materials, tanks can withstand temperatures from -50 degrees to 180 degrees F. A variety of fittings are available, from Banjo polypropylene, brass and stainless steel ball valves to 6061-T6 aluminum. Each bladder tank has welded seams and is tested for quality. 800/260-9950; www.huskyportable.com.
L.M.T. Inc.
Roll-off vacuum systems from L.M.T. Inc. range from 300-gallon units for small trucks or trailers to 110-barrel tanks for truck or trailer mounting. The 2,500-gallon steel vacuum tank has a full-open rear door, 25-hp electric-start Kohler engine and Jurop R-260 pump. The self-contained system is mounted on a SwampLoader Model SL-400 hydraulic hooklift frame. Tanks have hot-dip galvanizing to protect wetted components and for longer life. 800/545-0174; www.tanksandpumps.com.
Monster Tanks Inc.
The 500-barrel (21,000 gallons) MTI-45M tank from Monster Tanks Inc. has smooth internal steel walls with external reinforcement, V-bottom floor with sump pan and stair and platform system for easy top access. The tank has a manway on the front wall and two 4-inch Weco-style connections with 8-inch manifold. Other features include trailer lights and electrical system, 2-inch kingpin, internal chemical-resistant liner. A variety of tank volumes, colors and construction are available. 888/231-8515; www.monstertanksinc.com.
MPC Containment
Collapsible storage tanks from MPC Containment are made from synthetic-coated fabric for chemical and fuel compatibility that can withstand temperature extremes. Tanks feature rounded-corners to redistribute shell stress uniformly and can store diesel, jet fuel, aviation gas, fuel oil, brine and frac water, as well as water containing oils and heavy metals that must be treated prior to discharge. Tanks are available in 500- to 210,000-gallon sizes. Custom diameters and heights are available. Fittings for inlets, outlets, drains and vents are included. 800/621-0146; www.mpccontainment.com.
Pinnacle Manufacturing LLC
Frac tanks from Pinnacle Manufacturing LLC are made from 1/4-inch steel with formed channel exterior braces – no interior rods or corrugated walls. Standard features include 500-barrel (21,000 gallon) capacity, smooth walls with epoxy lining, four manways: three 20 inches (front, roof and rear) and one 25 inches on the passenger side. Models include the Side Stair, Flat Top, Open Top, Gas Busters, mix and double-wall. Options include inside and outside manifolds, gel lines, heat coils, sign plates, additional manways, valves and fittings. 256/840-8031; www.pinnaclemfg.net.
Roth Industries
Double-wall oil storage tanks from Roth Industries feature leak-sensor protection, weld-free galvanized steel outer tank capable of holding 110 percent of the inner tank, seamless high-density polyethylene inner tank and highly visible optical leak alarm. The tanks have a corrosion-resistant steel filling system and external 2-inch thread with no fittings below the oil line. Made for heating oil, diesel and up to B20 bio fuels, tanks are available in 110-, 165-, 275- (also low height), and 400-gallon sizes. Tanks measure 29 to 64 inches long, 28 to 30 inches wide and 44 to 68 inches tall. Weight ranges from 115 to 358 pounds. Tanks can be installed alone or in groups of up to five. 888/266-7684; www.roth-america.com.
Savatech Corp.
Sava transportable tanks from Savatech Corp. are self-supporting and can be placed on a flatbed or open ground. Available in 18 standard sizes as well as custom configurations, tanks are made from polyester fabric reinforced rubber. They are chemical and fuel resistant and can withstand temperatures from -22 degrees to 194 degrees F. Strap belt-loops are provided to prevent slipping and rolling while in motion. Fill and drain ports come standard with Storz C fitting on the top, end or side. Additional or larger ports can be installed. Handle-straps are provided. Ground sheet and straps are available, along with a choice of materials and colors. 888/436-9778; www.savatech.eu.
Smith & Loveless Inc.
The MOBILE FAST wastewater treatment system from Smith & Loveless Inc. is designed for gas and oil field camps. Utilizing fixed-film FAST bio-treat technology, the system yields pristine effluent without the need for clarifiers or advanced filtration. Microorganisms typically used in biological wastewater grow on the fixed-film media in an oxygen-rich submerged environment. Each system is configured for standardized intermodal transportation, fitting railcars, trucks and container ships. Four over-the-road transport models are available. Units include a machinery room with lockable steel door for protection against weather and possible vandalism. The ISO cargo container allows for the installation of additional units. 913/888-5201; www.smithandloveless.com.
Snyder Industries Inc.
Polyethylene storage tanks from Snyder Industries Inc. are made from either FDA and ANSI/NSF 61 compliant high-density linear polyethylene or cross-link polyethylene resin with UV stabilizer. Large tanks have molded lifting lugs and fitting flats at the top. Available in natural (translucent), black or other colors, the impact- and corrosion-resistant tanks feature seamless construction and controlled wall thickness. 402/467-5221; www.snydernet.com.
Toico Industries
Bladder tanks from Toico Industries are available in 25- to 50,000-gallon sizes and feature male or female fittings from 3/4 to 6 inches in size. Ball valves, flanges, flame arrestors, vents, access panels and pressure-relief valves are available. Applications include frac liquid and fuel storage as well as drinking water, wastewater (greywater), black water (sewage) storage and firefighting applications. 888/935-1133; www.toico.com.
Tote Systems
The 350-gallon, stainless steel portable tank from Tote Systems holds the equivalent of seven, 55-gallon drums. Tanks have a 22-inch drum cover with 3-inch fusible vent, 2-inch bung plug, 2-inch reduced port ball valve with Teflon seats and reverse locking handle. Measuring 42 inches long, 48 inches wide and 47 3/4 inches tall, other features of the UN/DOT-certified tanks include 6-inch clearance from tank bottom to floor, 1/4-inch radius corner combination lifting lug and stacking positioners. A 550-gallon tank is available. 888/535-8683; www.totetank.com.
Wastequip
The 500-barrel frac tank from Wastequip is designed to hold crude oil, chemicals, runoff water, diesel fuel or other materials without leaking. Featuring 1/4-inch construction, tanks have a round bottom for easy cleanout, vertical reinforcements on smooth sidewalls, raised galvanized bar grating, stairways with handrails and 25-inch manway at the rear. Other features include continuous welds, heavy structural channel substructure and heavy-duty suspension system. All tanks are hydrotested to ensure against leakage. Custom designs with a variety of interior coatings are available. 877/468-9278; www.wastequip.com.
