Mobile and bulk storage solutions can keep you on time and on schedule, wherever the job might take you
Ace Roto-Mold
Containment tanks from Ace Roto-Mold, a division of Den Hartog Industries, feature a secondary containment tank for two standard 55-gallon barrels or drums. The two-drum containment has double-wall construction to contain hazardous spills in the tank base. The inside of the tanks has molded-in chemical reservoirs. Tanks meet EPA 40 CFR 264.175 guidelines for secondary containment. Manufactured from rotationally molded polyethylene with UV inhibitors, tanks nest together for shipping and storage and include forklift pockets for easy handling. Tanks can be used for indoor or outdoor stationary applications. 800/342-3408; www.denhartogindustries.com.
Consolidated Fabricators Corp.
Frac tanks from Consolidated Fabricators Corp. can be used with pumps, filters, dewatering units and vacuum boxes. Designed for the onsite storage of water and liquids, the 8,500-gallon, 1/4-inch-thick tank measures 20 feet long, 8.5 feet wide and 95.5 inches tall. Featuring a roll-off under-frame, the tank has smooth interior walls, multiple valves and interior stainless ball float with exterior tank level gauge. 800/635-8335; www.con-fab.com.
Crescent Tank Mfg.
The rectangular vacuum tank from Crescent Tank Mfg. has a low-profile design for a lower center of gravity. The rectangular tank truck does the work of multiple vehicles, while the flat bed enables pipe, welding equipment or additional water tanks to be hauled to the job site. Liquid waste is held inside the tank with a separate freshwater poly tank. The vacuum tank can be configured for any combination of waste and water or recovery oil with volumes of 100 to 2,000 gallons. 585/657-4104; www.crescent-tank.com.
DEL Tank & Filtration Systems
The 405-barrel wheel-mounted mix tank from DEL Tank & Filtration Systems can handle up to 20 pounds per gallon of fluids and features four 10 hp mixers, round bottom and smooth walls. The bullet-style mix tank promotes uniform solid suspension and mixing that reduces buildup and clogged suctions. Options include liners, gun lines and steam coils. The 1/4-inch-thick tank can be customized and accommodate up to three shakers on top. 800/468-2657; www.deltank.com.
Flo Trend Systems Inc.
Oil/water separators from Flo Trend Systems Inc. feature Phase 3 coalescing tubes. Baffles and weirs reduce turbulence and promote even flow, while rectangular openings allow for settling solids to pass through the media. The separator is fully customizable with flows from 5 to 1,000 gpm. Winterization, level controls, integrated auxiliary oil collection tanks and pumps, sludge pump-out systems and alarms are available. 713/699-0152; www.flotrend.com.
Husky Portable Containment
Bladder tanks from Husky Portable Containment are manufactured from XR, PVC or urethane to meet military or commercial specifications and are available in sizes from 25 to 50,000 gallons. Fittings include NSF 61 PVC, aluminum, stainless steel and brass from 0.75 to 6 inches in diameter. Features include all stainless steel hardware, access panels, maneuvering straps near the corners and every 5 feet down the sides, flame arrestors, double T-style vents and mushroom vents. Storage bags are included. Options include field repair kits, ground covers and sunscreens. 800/260-9950; www.huskyportable.com.
Orenco Systems Inc.
Watertight, insulated T-Max portable storage tanks from Orenco Systems Inc. range from 5,000- to 15,000-gallon capacity. The chemical-resistant, fiberglass containers come in 14- to 42-foot lengths, weigh between 4,000 and 12,000 pounds and are approximately 7.5 feet wide and 8.5 feet tall. Units can be transported by truck, rail, cargo container, helicopter or other aircraft. Molded in a single piece, tanks have 4-inch, foam-cored fiberglass walls. The foam core has an estimated insulation value of R-25. Tanks withstand temperatures from -60 to 125 degrees F. Custom access equipment and railings are available, as are electrical control panels, pre-installed pump packages, anti-buoyancy devices and custom colors. 800/348-9843; www.orenco.com.
Powerblanket LLC
Flexible, wrap-around tote heaters from Powerblanket LLC warm IBC totes and other portable bulk containers. Utilizing GreenHeat technology, the wraps create a barrier of heat around the tote to insulate and protect a variety of temperature-sensitive materials. The energy-efficient system provides uniform heat distribution. Lightweight blankets have a winter-proof and water-resistant outer shell and are secured with adjustable nylon straps. The blanket heaters can be used on metal and plastic containers to help maintain flow, viscosity and workability. Manufactured to UL/CSA safety standards, the wraps are available in 275- and 330-gallon sizes and fit most standard industry totes. Custom sizes are available. The 120-volt heaters include an adjustable thermostat controller. 877/398-7407; www.powerblanket.com.
SEI Industries Inc.
Collapsible frac tanks from SEI Industries Inc. ensure isolation from soil and water and are easy to transport. One semi trailer can transport 24 tanks with a combined storage capacity of 1.2 million gallons (28,800 barrels). Designed for the oil and gas industry, one tank can store 50,000 gallons (1,200 barrels). The safety-orange tanks are made from a high-strength, abrasion- and chemical-resistant fabric that withstands temperatures to -58 degrees F and can be used with constantly heated fluids up to 162 degrees F. The optional Frac Tank Deployment System quickly rolls and unrolls tanks with minimum staff. 866/570-3473; www.sei-ind.com.
Snyder Industries Inc.
Horizontal chemical injection tanks from Snyder Industries Inc. are available in 125-, 225- and 335-gallon sizes (other sizes available) and feature corrosion-resistant polyethylene stands. Containment basins provide 110 percent tank containment and are enclosed to keep out debris and animals. The basins have a pump mount and 2- and 3-inch female threaded connection for items such as solar panels. 402/467-5221; www.snydernet.com.
Transcube
The double-walled TCL50 transportable fuel tank from Transcube provides 110-percent secondary containment of the inner container’s total capacity. With a capacity of 1,240 gallons, the tanks are UL 142 certified for diesel fuel storage. All fill ports, pumps, fittings and connections are housed at the top of the tank within the Enviroconnect secondary containment equipment cabinet. Tanks are capable of feeding three generators while simultaneously fueling equipment with a separate nozzle. Access to fuel and pumping equipment can be secured within the tank’s lockable cabinet. Other tank features include forklift pockets on all sides and full load-lifting eyes. Internal baffles prevent fuel surges. 866/814-2470; www.transcube.us.com.
TWI Oilfield Fabrication
Pressure vessels from TWI Oilfield Fabrication are manufactured in accordance with the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (BPVC), as well as the National Board Inspection Code (NBIC). In-house design services, including 3D detailing and complete vessel calculations are available. 970/625-1844; www.twi-fab.com.
UltraTech International
Ultra-Containment Berms from UltraTech International provide durable spill containment for trucks, frac tanks, drums, oil tanks and anything that can leak or spill. Seven models made of several materials are available. Standard sizes range from 4 feet by 6 feet to 15 feet by 66 feet. Custom sizes are available. Berms can be used where frac tanks are rolled for storage, trucks drive in for fuel offloading, multiple drums are stored on pallets for long-term storage, equipment maintenance and other applications. The All-In-One option includes pre-attached (welded or heat-sealed depending on materials used) ground tarp and track belts. 800/764-9563; www.spillcontainment.com.
Wastequip
Available in 20- and 25-yard sizes, vacuum boxes from Wastequip handle both hazardous and non-hazardous materials, including liquid waste, sludge, slurry, fly ash and more. Containers have a single-piece T-seal gasketed rear door with ratchet and chain sealing mechanism for a complete seal. Containers are water pressure tested against leakage to 27.5 inches Hg. Made of 1/2-inch steel plate, the box has a single-piece floor and body. The substructure features crossmembers on 12-inch centers and dirt-shedding sidewall supports. The chain clevis attachment allows easy service in the field. 877/468-9278; www.wastequip.com.
Comments